软管泵现货销售

软管泵工作原理：
一根内壁光滑，强度可靠的特制橡胶软管安装在泵体内部，通过一对压辊沿着软管旋转挤压，这样的 旋转使得介质往一个方向输送而不会倒流，软管在输送介质之后，由被压扁软管的自身弹性和侧导轮的强制下，软管恢复原状，此时，软管内产生高真空将介质再次吸入管腔，然后介质在随之而来的压辊挤压下从软管内排出，如此周而复始，介质不断的被吸入和排出。目前产品使用温度为≤100℃。根据用户需要可以开发使用温度在120℃的软管泵软管产品。
Working principle of hose pump:
A special rubber hose with a smooth inner wall and reliable strength is installed inside the pump body. It is rotated and squeezed along the hose by a pair of pressure rollers. This rotation allows the medium to be transported in one direction without flowing back. After that, due to the elasticity of the flattened hose and the force of the side guide wheels, the hose returns to its original state. At this time, a high vacuum is generated in the hose to suck the medium into the lumen again, and then the medium is pressed by the subsequent pressure roller. It is discharged from the hose under the squeeze, and so on and on, the medium is continuously sucked in and discharged. The current product temperature is ≤100 ℃. According to user needs, we can develop hose pump hose products with a temperature of 120 ℃.

工艺介绍：用传统的物化法或生物法来处理垃圾渗滤液，不仅效果较差、难以达标，还会存在占地面积大，建成时间长等问题；如果采用包括纳滤、反渗透等在内的MBR（即膜+生化结合）工艺进行处理，则会存在投资高、工艺复杂、运行费用高、处理后的浓缩液造成二次污染等各类问题。                                  

软管泵的使用与维护<br />
软管泵的正常工作对整套钻探设备的生产效率起着很大的作用。正确维护和使用软管泵能提高钻进速度和纯钻进时间，保护孔内清洁，并能将井壁坍和卡钻事故减至小。因此我们应当做好泵的使用，维护和保养工作。为保护软管泵的寿命及其正常工作，必须从包装运输保存开始，直至安装使用和维护保养都精心注意。<br />
1、软管泵在开启前的维护与保养，在软管泵开动前应对软管泵系统作检查；对液力端的整个循环系统作仔细检查；<br />
2、软管泵在运转过程中的使用与维护，检查各运动件的润滑情况；要密切注意泥浆质量；注意压力表，阀工作是否正常；曲轴箱内的油温及缸套活塞副的温度不得过高。<br />！